Spectrom Pty Ltd

Spectrom Pty Ltd

Average Reviews

Description

Spectrom is a market leader in servicing civil, manufacturing, mining and construction industries. Spectrom strives to set standards of service delivery, safety and customer value that others aspire to.

Stud Welding

Stud welding is a fastening technique of metal to metal using only one side of the base material. It eliminates drilling, punching, threading, gluing, riveting, screwing, or finishing. Studwelding is a tremendous time and cost savings.

There are two (2) main types of studwelding: Capacitor Discharge (CD) stud welding and Drawn Arc stud welding (ARC).

During the CD process, the capacitors are charged to a setting pre determined on the front of the power supply. The CD gun is loaded with a weld stud and pushed into the base material under spring pressure. The tip touches the workpiece which closes the electrical circuit. Upon trigger from the CD gun the capacitors are emptied, the stud and workpiece surface from a molten material and solidfy together forming a solid weld. The welding time for CD studs is approx 3 milliseconds.

During the ARC process, the stud touches the workpiece which closes the electrical circuit. Upon trigger, the ARC gun lifts the stud off the workpiece with the help of a solenoid (magnetic coil). The main arc is initiated between the workpiece and the tip of the ARC stud. The base material and stud melt forming a molten material and they are forced back together under spring pressure creating a weld. The weldpool solidifies and cools down. The welding time for ARC studs vary from 5 to 990 milliseconds.

Bondeking

Bondek Structural Steel Decking is a highly efficient, versatile and robust formwork, reinforcement and ceiling system for concrete slabs. It is a profiled steel sheeting widely accepted by the building and construction industry to offer efficiency and speed of construction. It has re-entrant ribs into the concrete slab at approximate 200mm centres and its depth is 54mm. It is available in a Base Metal Thicknesses (BMT) 0.6, 0.75, 0.9 and 1.0mm.

Servicing & Spare Parts

Servicing or repairing your welder, generator or any other type of welding equipment?

We stock an extensive range of Spare parts, filters, service kits, cable & drive roll kits etc. Just to name a few

If your not sure what you need our qualified personnel can source the information for you.